Qmi.WdsCallEndReason
Description: Reference for Qmi.WdsCallEndReason

### Enumeration

# QmiWdsCallEndReason

since: 1.0

#### Declaration

    enum Qmi.WdsCallEndReason

#### Description [src]

Reason for ending the call.

Available since: 1.0

#### Members

`QMI_WDS_CALL_END_REASON_GENERIC_UNSPECIFIED`

  Unspecified reason.

  - Value: `1`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GENERIC_CLIENT_END`

  Client end.

  - Value: `2`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GENERIC_NO_SERVICE`

  No service.

  - Value: `3`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GENERIC_FADE`

  Fade.

  - Value: `4`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GENERIC_RELEASE_NORMAL`

  Release normal.

  - Value: `5`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GENERIC_ACCESS_ATTEMPT_IN_PROGRESS`

  Access attempt in progress.

  - Value: `6`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GENERIC_ACCESS_FAILURE`

  Access Failure.

  - Value: `7`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GENERIC_REDIRECTION_OR_HANDOFF`

  Redirection or handoff.

  - Value: `8`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GENERIC_CLOSE_IN_PROGRESS`

  Close in progress.

  - Value: `9`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GENERIC_AUTHENTICATION_FAILED`

  Authentication failed.

  - Value: `10`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GENERIC_INTERNAL_ERROR`

  Internal error.

  - Value: `11`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_CDMA_LOCK`

  CDMA specific. Phone is CDMA-locked.

  - Value: `500`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_CDMA_INTERCEPT`

  CDMA specific. Received intercept from the BS.

  - Value: `501`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_CDMA_REORDER`

  CDMA specific. Received reorder from the BS.

  - Value: `502`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_CDMA_RELEASE_SO_REJECT`

  CDMA specific. Received release from the BS, SO reject.

  - Value: `503`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_CDMA_INCOMING_CALL`

  CDMA specific. Received incoming call from the BS.

  - Value: `504`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_CDMA_ALERT_STOP`

  CDMA specific. Received alert stop from the BS.

  - Value: `505`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_CDMA_ACTIVATION`

  CDMA specific. Received end activation.

  - Value: `506`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_CDMA_MAX_ACCESS_PROBES`

  CDMA specific. Maximum access probes transmitted.

  - Value: `507`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_CDMA_CCS_NOT_SUPPORTED_BY_BS`

  CDMA specific. Concurrent service not supported by the BS.

  - Value: `508`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_CDMA_NO_RESPONSE_FROM_BS`

  CDMA specific. No response received from the BS.

  - Value: `509`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_CDMA_REJECTED_BY_BS`

  CDMA specific. Rejected by the BS.

  - Value: `510`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_CDMA_INCOMPATIBLE`

  CDMA specific. Concurrent services requested are incompatible.

  - Value: `511`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_CDMA_ALREADY_IN_TC`

  CDMA specific. Already in TC.

  - Value: `512`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_CDMA_USER_CALL_ORIGINATED_DURING_GPS`

  CDMA specific. Call originated during GPS.

  - Value: `513`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_CDMA_USER_CALL_ORIGINATED_DURING_SMS`

  CDMA specific. Call originated during SMS.

  - Value: `514`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_CDMA_NO_SERVICE`

  CDMA specific. No service.

  - Value: `515`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_CONFERENCE_FAILED`

  GSM/WCDMA specific. Call origination request failed.

  - Value: `1000`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_INCOMING_REJECTED`

  GSM/WCDMA specific. Client rejected incoming call.

  - Value: `1001`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_NO_SERVICE`

  GSM/WCDMA specific. No service.

  - Value: `1002`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_NETWORK_END`

  GSM/WCDMA specific. Network ended the call.

  - Value: `1003`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_LLC_SNDCP_FAILURE`

  GSM/WCDMA specific. LLC or SNDCP failure.

  - Value: `1004`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_INSUFFICIENT_RESOURCES`

  GSM/WCDMA specific. Insufficient resources.

  - Value: `1005`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_OPTION_TEMPORARILY_OUT_OF_ORDER`

  GSM/WCDMA specific. Service option temporarily out of order.

  - Value: `1006`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_NSAPI_ALREADY_USED`

  GSM/WCDMA specific. NSAPI already used.

  - Value: `1007`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_REGULAR_DEACTIVATION`

  GSM/WCDMA specific. Regular PDP context deactivation.

  - Value: `1008`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_NETWORK_FAILURE`

  GSM/WCDMA specific. Network failure.

  - Value: `1009`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_REATTACH_REQUIRED`

  GSM/WCDMA specific. Reattach required.

  - Value: `1010`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_PROTOCOL_ERROR`

  GSM/WCDMA specific. Protocol error.

  - Value: `1011`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_OPERATOR_DETERMINED_BARRING`

  GSM/WCDMA specific. Operator-determined barring.

  - Value: `1012`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_UNKNOWN_APN`

  GSM/WCDMA specific. Unknown or missing APN.

  - Value: `1013`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_UNKNOWN_PDP`

  GSM/WCDMA specific. Unknown PDP address or type.

  - Value: `1014`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_GGSN_REJECT`

  GSM/WCDMA specific. Activation rejected by GGSN.

  - Value: `1015`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_ACTIVATION_REJECT`

  GSM/WCDMA specific. Activation rejected.

  - Value: `1016`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_OPTION_NOT_SUPPORTED`

  GSM/WCDMA specific. Service option not supported.

  - Value: `1017`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_OPTION_UNSUBSCRIBED`

  GSM/WCDMA specific. Service option not subscribed.

  - Value: `1018`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_QOS_NOT_ACCEPTED`

  GSM/WCDMA specific. QoS not accepted.

  - Value: `1019`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_TFT_SEMANTIC_ERROR`

  GSM/WCDMA specific. Semantic error in TFT operation.

  - Value: `1020`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_TFT_SYNTAX_ERROR`

  GSM/WCDMA specific. Syntax error in TFT operation.

  - Value: `1021`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_UNKNOWN_PDP_CONTEXT`

  GSM/WCDMA specific. Unknown PDP context.

  - Value: `1022`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_FILTER_SEMANTIC_ERROR`

  GSM/WCDMA specific. Semantic error in packet filters.

  - Value: `1023`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_FILTER_SYNTAX_ERROR`

  GSM/WCDMA specific. Syntax error in packet filters.

  - Value: `1024`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_PDP_WITHOUT_ACTIVE_TFT`

  GSM/WCDMA specific. PDP context without TFT activated.

  - Value: `1025`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_INVALID_TRANSACTION_ID`

  GSM/WCDMA specific. Invalid transaction ID.

  - Value: `1026`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_MESSAGE_INCORRECT_SEMANTIC`

  GSM/WCDMA specific. Message incorrect semantically.

  - Value: `1027`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_INVALID_MANDATORY_INFO`

  GSM/WCDMA specific. Invalid mandatory information.

  - Value: `1028`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_MESSAGE_TYPE_UNSUPPORTED`

  GSM/WCDMA specific. Message type not implemented.

  - Value: `1029`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_MESSAGE_TYPE_NONCOMPATIBLE_STATE`

  GSM/WCDMA specific. Message not compatible with state.

  - Value: `1030`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_UNKNOWN_INFO_ELEMENT`

  GSM/WCDMA specific. Information element unknown.

  - Value: `1031`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_CONDITIONAL_IE_ERROR`

  GSM/WCDMA specific. Conditional IE error.

  - Value: `1032`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_MESSAGE_AND_PROTOCOL_STATE_UNCOMPATIBLE`

  GSM/WCDMA specific. Message and protocol state uncompatible.

  - Value: `1033`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_APN_TYPE_CONFLICT`

  GSM/WCDMA specific. APN type conflict.

  - Value: `1034`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_NO_GPRS_CONTEXT`

  GSM/WCDMA specific. No GPRS context.

  - Value: `1035`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_GSM_WCDMA_FEATURE_NOT_SUPPORTED`

  GSM/WCDMA specific. Feature not supported.

  - Value: `1036`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_EVDO_CONNECTION_DENY_GENERAL_OR_BUSY`

  CDMA/EVDO specific. Received Connection Deny: General or Network busy.

  - Value: `1500`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_EVDO_CONNECTION_DENY_BILLING_OR_AUTHENTICATION_FAILURE`

  CDMA/EVDO specific. Received Connection Deny: Billing or Authentication failure.

  - Value: `1501`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_EVDO_HDR_CHANGE`

  CDMA/EVDO specific. Change HDR.

  - Value: `1502`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_EVDO_HDR_EXIT`

  CDMA/EVDO specific. Exit HDR.

  - Value: `1503`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_EVDO_HDR_NO_SESSION`

  CDMA/EVDO specific. No HDR session.

  - Value: `1504`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_EVDO_HDR_ORIGINATION_DURING_GPS_FIX`

  CDMA/EVDO specific. HDR call ended in favor of a GPS fix.

  - Value: `1505`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_EVDO_HDR_CONNECTION_SETUP_TIMEOUT`

  CDMA/EVDO specific. Connection setup timeout.

  - Value: `1506`
  - Available since: 1.0
`QMI_WDS_CALL_END_REASON_EVDO_HDR_RELEASED_BY_CM`

  CDMA/EVDO specific. Released HDR call by call manager.

  - Value: `1507`
  - Available since: 1.0

#### Type functions

###### qmi_wds_call_end_reason_get_string

Gets the nickname string for the `QmiWdsCallEndReason` specified at `val`.

since: 1.0